With four countersunk holes, this fitting is ideal as a flange to terminate handrail to a wall or other similar application. This fitting may be used on structures where it is only required as a positional fixing.
Can be used for Handrails, Walkways, Edge Protection, Racking, Guardrails, Balustrades. These clamps are compatible with our 8mm nylon frame anchors.
Info |
Detail |
Manufacturing Standard |
B.S. EN1461. |
Material |
Blackheart malleable iron casting (BS EN 1562:1997) using grade B32-10 material with a hot dipped galvanised finish (BS EN 1461:1999) |
Allen Key Size |
3/8 |
Weight |
0.34kg
|
We do not recommend pre-drilling as there can be irregularities in casting that can produce small variations in the size of the holes.
All clamps come with stainless steel grub screws fitted. If full tightened using a ratchet key to a torque of 4.1kg/m (29ft/lb), the grub screw is capable of withstanding an applied slipload of 900kg